Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 835
L2CoS: VLAN Not Con d, portshow fciptunnel 1/12 -c
View all Dell Brocade 6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 835 highlights
To display an FCIP tunnel with additional circuit information: switch:admin> portshow fciptunnel 1/12 -c Tunnel ID: 1/12 Tunnel Description: Admin Status: Enabled Oper Status: Up Compression: Off Fastwrite: Off Tape Acceleration: Off TPerf Option: Off IPSec: Disabled QoS Percentages: High 50%, Med 30%, Low 20% Remote WWN: Not Configured Local WWN: 10:00:00:05:1e:52:fe:00 Peer WWN: 10:00:00:05:1e:39:a4:76 Circuit Count: 2 Flags: 0x00000000 FICON: Off Circuit ID: 1/12.0 Circuit Num: 0 Admin Status: Enabled Oper Status: Up Connection Type: Default Remote IP: 192.168.12.200 Local IP: 192.168.12.100 Metric: 0 Min Comm Rt: 2500000 Max Comm Rt: 2500000 SACK: On Min Retrans Time: 100 Max Retransmits: 8 Keepalive Timeout: 10000 Path MTU Disc: 0 VLAN ID: (Not Configured) L2CoS: (VLAN Not Configured) DSCP: F: 0 H: 0 M: 0 L: 0 Flags: 0x00000000 Circuit ID: 1/12.1 Circuit Num: 1 Admin Status: Enabled Oper Status: Up Connection Type: Default Remote IP: 192.168.12.201 Local IP: 192.168.12.101 Metric: 1 Min Comm Rt: 2500000 Max Comm Rt: 2500000 SACK: On Min Retrans Time: 100 Max Retransmits: 8 Keepalive Timeout: 10000 Path MTU Disc: 0 VLAN ID: (Not Configured) L2CoS: (VLAN Not Configured) DSCP: F: 0 H: 0 M: 0 L: 0 Flags: 0x00000000 Fabric OS Command Reference 53-1002746-01 portShow 2 807