Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 375

fcrRouteShow 2 fcrRouteShow Displays FC Router route information. SYNOPSIS fcrrouteshow DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to display routes through the FC Router backbone fabric to accessible destination fabrics. An FC Router backbone fabric is the fabric that contains the E_Ports of this platform and routes inter-fabric traffic between imported fabrics, creating a meta-SAN. There are FC Router ports that reside on the backbone fabric. These ports are known as NR_Ports. NR_Ports send and receive inter-fabric traffic. For the AP7420, there is a one-to-one relationship between an NR_Port on a backbone fabric and an EX_Port. NR_Port technology enables EX_Ports to exchange traffic across an intermediate fabric. NR_Ports are addressable entities on the backbone fabric and have port IDs relevant to the backbone fabric. Because cascaded backbone/intermediate fabrics are currently not supported, an NR_Port provides a path to a single fabric with a single FC Router protocol cost. Multiple NR_Ports can provide paths to the same destination fabric. "No routes found" is displayed if there is no route information available at this FC Router. There is no route information available if no EX_Ports are configured at this FC Router. The output includes: Destination Fabric ID The destination fabric. NR_Port PID The port ID of the NR_Port. The port ID is relevant only on the backbone fabric. This NR_Port has a route to the destination fabric identified by the "Destination Fabric ID" column. FCRP Cost The FC Router protocol cost (for routing decisions) for this NR_Port. The FCRP cost is the same (1000) for all NR_Ports. WWN of the Principal Switch in the Dest. Fabric The world wide name of the principal switch in the destination fabric. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. None To display the route information: switch:admin> fcrrouteshow Destination NR_Port FCRP Cost WWN of Principal Fabric Id PID Switch in the Dest. Fabric 4 640000 1000 10:00:00:60:69:c0:05:d1 4 640100 1000 10:00:00:60:69:c0:05:d1 5 640200 1000 10:00:00:60:69:c0:20:ed 5 640300 1000 10:00:00:60:69:c0:20:ed fcrFabricShow, fcrPhyDevShow, fcrProxyDevShow, lsanZoneShow, switchShow Fabric OS Command Reference 347 53-1002746-01