Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 384

2 ficonCfg ficonCfg Configures the specified FICON database. SYNOPSIS ficoncfg --set database port ficoncfg --reset database ficoncfg --help DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to configure a FICON database on a specified port. Refer to ficonShow for a description of the database content. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: port Specifies the port to be configured. You can specify the port by its port index number or by a hexadecimal number. Use switchShow for a listing of valid port index numbers. --set Sets the configuration entry. --reset Resets the configuration entry to its default value. database Specifies the name of the FICON database. The only database currently supported is the following: LIRR Devices registered to receive link incident reports. To set the LIRR database on a port using a decimal index number: switch:user> ficoncfg --set LIRR 27 To reset the LIRR switch:user> ficoncfg --reset LIRR To set the LIRR database using a hexadecimal port number: switch:user> ficoncfg --set LIRR 0x1b switch:user> ficonshow LIRR The Local LIRR database has 0 entries. Current LIRR device port number: 27 (0x1b) ficonHelp, ficonShow 356 Fabric OS Command Reference 53-1002746-01