Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 412
firmwareDownloadStatus
View all Dell Brocade 6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 412 highlights
2 firmwareDownloadStatus firmwareDownloadStatus Displays the status of a firmware download. SYNOPSIS firmwaredownloadstatus DESCRIPTION NOTES OPERANDS EXAMPLES Use this command to display an event log that records the progress and status of events during a firmware download. The event log is created by the firmware download process and is kept until you issue another firmwareDownload command. A timestamp is associated with each event. When downloading Fabric OS firmware, the event logs in the two control processors (CPs) are synchronized and you can run this command from either CP. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. None To display the status of a firmware download on a switch: switch:admin> firmwaredownloadstatus [1]: Tue Mar 29 21:43:14 2011 Firmware is being downloaded to the switch. This step may take up to 30 minutes. [2]: Tue Mar 29 21:48:26 2011 Firmware has been downloaded to the secondary partition of the switch. [3]: Tue Mar 29 22:06:57 2011 The firmware commit operation has started. This may take up to 10 minutes. [4]: Tue Mar 29 22:10:19 2011 The commit operation has completed successfully. [5]: Tue Mar 29 22:10:19 2011 Firmwaredownload command has completed successfully. Use firmwareshow to verify the firmware versions. To display the status of a firmware download on a chassis: switch:admin> firmwaredownloadstatus [1]: Fri Mar 25 13:12:56 2011 Slot 7 (CP1, active): Firmware is being downloaded to the switch. This step may take up to 30 minutes. [2]: Fri Mar 25 13:33:23 2011 Slot 7 (CP1, active): Firmware has been downloaded to the secondary partition of the switch. [3]: Fri Mar 25 16:38:55 2011 Slot 7 (CP1, active): Firmwarerestore is entered. System will reboot and a firmware commit operation will start upon boot up. [4]: Fri Mar 25 16:49:12 2011 Slot 7 (CP1, standby): The firmware commit operation has started. This may take up to 10 minutes. 384 Fabric OS Command Reference 53-1002746-01