Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 935

secDefineSize 2 secDefineSize Displays the size of the defined security database. SYNOPSIS secdefinesize DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to display the size of the defined security database. The command also displays the maximum database size. For switches running Fabric OS v6.2.0 and later, the maximum security database size is 1 Megabyte per logical switch. With up to eight partitions, the total database size on a chassis can be up to 8 Megabytes. On switches that are not Virtual Fabric-capable, the security database is limited to 1 Megabyte. For switches running earlier versions of Fabric OS (up to v5.3.0), the maximum size is 256 Kilobytes. The effective security DB size is the lowest supported by the fabric. The presence of a Standby CP that runs an earlier version of the operating system drops the effective security DB size on an Active CP that runs Fabric OS v6.2.0 or later. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. None To display the size of the defined security database switch:admin> secdefinesize Size of security defined data: 35 bytes \ (Max 1048576 bytes) secActiveSize, secGlobalShow Fabric OS Command Reference 907 53-1002746-01