Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 1053

switchStatusPolicySet 2 switchStatusPolicySet Sets the policy parameters that determine the overall switch status. SYNOPSIS switchstatuspolicyset DESCRIPTION Use this command to set policy parameters for calculating the overall status of the switch. The policy parameter values determine how many failed or faulty units of each contributor are allowed before triggering a status change in the switch from HEALTHY to MARGINAL or DOWN. For some components, a single contributor can force the overall status of the switch to MARGINAL or DOWN. For example, assuming that the switch contributor values are set to the default values, the presence of one faulty fan in a Brocade 6510 would set the overall switch status to MARGINAL. Two faulty fans would set the overall switch status to DOWN. This command runs interactively and prompts you to accept or change the default value for each supported contributor. The unit for thresholds (both default and user-defined) of MarginalPorts, FaultyPorts, ErrorPorts, and MissingSFPs are calculated as a percentage of the current number of physical ports present in the switch at any given moment. For example, the input value of 25.00 indicates 25% of all physical ports. VE_Ports and FCoE Ports are excluded from the calculation. The percentage supports decimal values of up to two decimal points. The following component thresholds are configurable. Components and value ranges are platform-dependent: PowerSupplies Absent or failed power supplies, and power supplies that are not in the correct slot for redundancy. Temperatures Number of units with out-of-range temperature settings or faulty temperature sensors. Fans Number of faulty fans. WWN Number of faulty WWN cards. CP Number of Control Processors down. Blade Number of faulty Blades. CoreBlade Number of faulty core blades. Flash Out of range flash memory. MarginalPorts Percentage of ports exceeding configured Fabric Watch thresholds. FaultyPorts Percentage of ports with hardware-related port faults. MissingSFPs Percentage of ports with missing SFPs (small form-factor pluggables) or SFPs installed but not cabled. Fabric OS Command Reference 53-1002746-01 1025