Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 1027

supportShowCfgShow 2 supportShowCfgShow Displays the groups of commands enabled for display by the supportShow command. SYNOPSIS supportshowcfgshow DESCRIPTION NOTES OPERANDS EXAMPLES Use this command to display the groups of commands enabled for display by the supportShow command. Use the supportShowCfgEnable and the supportShowCfgDisable commands to modify which groups are displayed. The FCIP commands are supported only on the Brocade 7800/FX8-24 platforms and cannot be configured to collect or display data on unsupported platforms. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. None To display command groups configured for data collection on the Brocade 6510: switch:admin> supportshowcfgshow os enabled exception enabled port enabled fabric enabled services enabled security enabled network enabled portlog enabled system enabled extend disabled filter disabled perfmon disabled ficon disabled iswitch disabled asic_db enabled fcip disabled (not applicable to this platform) ag disabled To display command groups configured for data collection on the Brocade 7800 switch:admin> supportshowcfgshow os enabled exception enabled port enabled fabric enabled services enabled security enabled network enabled portlog enabled system enabled extend disabled filter disabled perfmon disabled ficon disabled Fabric OS Command Reference 999 53-1002746-01