Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 104

2 bootLunCfg bootLunCfg Transparently configures the boot LUN for an HBA. SYNOPSIS bootluncfg --add HBA_WWN PWWN LUN_ID bootluncfg --delete HBA_WWN [PWWN LUN_ID] bootluncfg --show bootluncfg --help DESCRIPTION NOTES OPERANDS Use this command to configure the boot LUN for an HBA. Existing fabric-based boot LUN discovery allows the host's boot LUN information to be stored in the fabric zone database by using a zone name that contains the PWWN of an HBA port. The zone members consist of storage target PWWN and LUN ID. This command provides a simplified and transparent procedure for configuring the boot LUN. Once configured, the HBA boot code queries the zone member list for the zone name matching the HBA PWWN to determine the boot target and LUN. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: HBA_WWN Specifies the WWN of the HBA port connecting to the boot LUN. This is a hexadecimal number, for example, 10:00:00:000:05:1e:41:9a:cb. PWWN Specifies the WWN of the remote storage target's port. For example, 50:00:00:05:1e:41:9a:ca. This operand is required with the --add option and optional with the --delete option. LUN_ID Specifies the hexadecimal LUN identification. The LUN ID is represented as an eight-byte value (four-level LUN addressing), for example, 09AABBCCDDEEFF00. This operand is required with the --add option and optional with the --delete option. --add Configures the specified HBA (HBA_WWN) to boot from the specified LUN (LUN_WWN) accessible through the Target PWWN (PWWN). --delete Removes the mapping for the HBA (HBA_PWWN) to boot from the LUN (LUN_ID) accessible through the Target Port (PWWN). --show Displays all configured HBA to Port/LUN Mappings. --help Displays the command usage. 76 Fabric OS Command Reference 53-1002746-01