Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 379

fddCfg 2 fddCfg Manages the fabric data distribution configuration parameters. SYNOPSIS fddcfg --showall fddcfg --localaccept policy_list fddcfg --localreject policy_list fddcfg --fabwideset policy_list DESCRIPTION NOTES OPERANDS Use this command to manage the fabric data distribution configuration parameters. These parameters control the fabric-wide consistency policy. Switches can be locally configured to allow or reject a security policy. Supported policies include the following: SCC Switch Connection Control policy DCC Device Connection Control policy SCC Switch Connection Control policy PWD Password policy FCS Fabric Configuration Server policy PWD Fabric Element Authentication policy IPFILTER IP Filter policy Automatic distribution of a fabric-wide consistency policy is limited to SCC, DCC, and FCS policies. Use the --fabwideset parameter to enforce these policies fabric-wide in tolerant or strict mode, In strict mode, fabric-wide enforcement of FCS consistency policy is possible in mixed fabrics. However, switches that do not support the policies ignore them. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: --showall Displays the accept/reject configuration of all policy sets and the fabric-wide consistency policy on the switch. --localaccept policy_list Configures the switch to accept distributions of the specified policies. The policies in policy_list must be separated by semicolons and enclosed in quotation marks; for example, "SCC;DCC;FCS". Fabric OS Command Reference 351 53-1002746-01