Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 386

2 ficonCupSet ficonCupSet Sets FICON-CUP parameters for a switch. SYNOPSIS ficoncupset fmsmode enable | disable ficoncupset modereg bitname 0 | 1 ficoncupset MIHPTO seconds ficoncupset CRP PID CHID DESCRIPTION NOTES OPERANDS Use this command to set FICON-CUP (Control Unit Port) parameters for a switch. All parameters can be set while the switch is online. Changes made by this command take effect immediately. A reboot is not required. Use ficonCupShow to display current settings. A FICON License is required to enable FMSMODE and to manage ports with FICON CUP. Without a license, FICON CUP traffic will not be allowed. When FMSMODE is enabled, port names are truncated to 24 characters to be FICON compliant, and a 24-character limit is imposed on all newly created port names. FICON Management Server (FMS) mode cannot be enabled if port ID (PID) Format 2 is used. Refer to the Fabric OS Administrator's Guide for information on PID formats. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: fmsmode Configures the FICON Management Server (FMS) mode for the switch. Specify one of the following modes: enable Enables the FICON Management Server mode. When you enable the switch, you must wait until all ports have come online before enabling fmsmode. disable Disables the FICON Management Server mode. modereg Set a bit in the FICON-CUP mode register. The following operands are required: bitname 0 | 1 Specifies a given bit value to be (1) set or not set (0). Valid values for bitname are POSC Programmed offline state control UAM User alert mode ASM Active=saved mode DCAM Director clock alert mode 358 Fabric OS Command Reference 53-1002746-01