Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 453

fwSetToCustom 2 fwSetToCustom Sets Fabric Watch thresholds and alarm levels to custom values. SYNOPSIS fwsettocustom DESCRIPTION NOTES OPERANDS EXAMPLES Use this command to set threshold and alarm levels to custom values for all Fabric Watch classes and areas. Fabric Watch uses two types of settings: factory default settings and user-defined custom settings. • Factory default settings are automatically enabled. These settings vary depending on hardware platform, and cannot be modified. • For some Fabric Watch parameters, you can create custom configurations to suit your unique environment. The fwSetToCustom command allows you to switch from default to custom settings. The command assumes that a set of user-defined thresholds have been configured prior to executing the fwSetToCustom command. If no user-defined settings exist, this command reapplies the default values. Use the advanced configuration option provided with the portThConfig, thConfig, and sysMonitor commands to view and modify custom and default values for specified classes and areas in Fabric Watch. For specific configuration procedures, refer to the Fabric Watch Administrator's Guide. This command requires a Fabric Watch license. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. None To apply configured custom settings to all Fabric Watch classes and areas: switch:admin> fwsettocustom Committing configuration...done. To view the current Fabric Watch configuration for the environment class: switch:admin> sysmonitor --show env Class: ENV Area : TEMP ThLevel : Cust (Applied) ActLevel: Cust (Applied) High : Custom: TimeBase: None Value : 90 Trigger : Above Action: Raslog,SNMP Trigger : Below Action: None Default: TimeBase: None Value : 65 Trigger : Above Action: Raslog,SNMP Trigger : Below Action: Raslog,SNMP Low: Custom: TimeBase: None Value :32 Fabric OS Command Reference 425 53-1002746-01