Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 449

fwPortDetailShow 2 NOTES OPERANDS EXAMPLES When used without operands, this command displays information for all ports. This command requires a Fabric Watch license. Port errors are not supported for virtual ports and SFP errors are not applicable for virtual ports. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: --p port Displays a port detail report for the specified port. --s portState Displays a port detail report for the specified portState. Valid portState entries include the following: h Report based on all healthy ports. m Report based on all marginal ports. f Report based on all faulty ports. o Report based on all offline ports. To retrieve a port detail report for a switch configured with an IPv6 address: switch:user> fwportdetailshow Port Detail Report \ Report time: 09/11/2006 05:51:15 PM Switch Name: switch IP address: 1080::8:800:200C:417A Port Exception report [by All] --------Port-Errors-----------Port# Type State Dur(H:M) LFA LSY LSI PER INW 000 U OFFLINE 080:24 001 E HEALTHY 073:22 002 L HEALTHY 080:24 003 U OFFLINE 080:24 004 U OFFLINE 002:53 - - - - - \ -----SFP-Errors---CRC PSC BLP STM SRX STX SCU SVO output truncated) Fabric OS Command Reference 421 53-1002746-01