Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 432
Count, Log timestamp, TX port, Frame contents, disable, enable, clear
View all Dell Brocade 6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 432 highlights
2 frameLog NOTES OPERANDS Type Reason for the frame discard. Frames can be discarded for a variety of reasons. The only discard reason currently handled by the frame log is timeout. Count The number of discarded frames logged in the frame log that have the log timestamp, TX port, RX port, SID, DID, SFID and DFID values listed on this line of output. Note that this count may be less than the actual number of such frames discarded, because the frame log cannot log the details of all discarded frames. When viewed in dump mode, the frame log displays the following information: Log timestamp The date and time when the frames described in this line of output were discarded. TX port Egress port where the frames were bound to exit the chassis. A port displayed as -1 (or -1/-1 on slot-based systems) indicates an internal port. RX port Ingress port where the frames were bound to enter the chassis. A port displayed as -1 (or -1/-1 on slot-based systems indicates an internal port. Type Reason for the frame discard. Frames can be discarded for a variety of reasons. The only discard reason currently handled by the frame log is timeout. Frame contents The first 64 bytes of the frame contents in hexadecimal format. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. The Frame Log operation is chassis-wide. This command has the following operands: --disable Disables logging of discarded frames, which is enabled by default. This command clears the history of discarded frames and gathering of new information ceases. When frame logging is disabled, only the --help and --enable operations are permitted. --enable Enables logging of discarded frames after the feature was disabled. --clear Clears the stored history of discarded frames. This operation is permitted only when the feature is enabled. 404 Fabric OS Command Reference 53-1002746-01