Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 331

fcoeLoginGroup 2 fcoeLoginGroup Creates and manages FCoE login group configuration. SYNOPSIS fcoelogingroup --create lgname -self | -switch swwn [-allowall | member[;member] ...] fcoelogingroup --delete lgname fcoelogingroup --add lgname member[;member] ... fcoelogingroup --remove lgname wwn fcoelogingroup --rename lgname newlgname fcoelogingroup --help DESCRIPTION NOTES OPERANDS Use this command to create or modify the FCoE login management configuration fabric-wide. You can create or delete a login group, add Virtual N_Port (VN_Port) WWNs to a login group, or remove VN_Port WWNs from a login group. The configuration changes effected by this command are kept in a transaction buffer until you save the new configuration with the fabric-wide fcoelogincfg --save command. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands. --help Displays the command usage. --create Creates a login group with the specified name and associates it with a specified switch. lgname Specifies the name of the login group for this switch. The maximum length is a 64-byte string. -self Specifies the WWN of the current switch. When this operand is specified, the login group is associated with the current switch. -switch swwn Specifies the WWN of the switch for which to create the login group. -allowall Allows all VN_Port devices to log in to the switch. member Identifies the WWN of the VN_Port. The WWN must be specified in hex format as xx.xx.xx.xx.xx.xx.xx.xx. If more than one member is specified, members must be separated by a semicolon. Only specified members are allowed to log in to the switch. --delete Deletes a login group. Fabric OS Command Reference 303 53-1002746-01