Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 173

configDownload 2 SEE ALSO To download the switch configurations to a logical switch with FID 8 from an attached USB device (requires chassis permissions): switch:admin> configdownload -fid 8 -USB config.txt To download the switch configurations belonging to a logical switch with FID 4 to a logical switch with FID 8 from an attached USB device (requires chassis permissions): switch:admin> configdownload -fid 8 -sfid 4 \ -USB config_fid8.txt To download the Virtual Fabric configuration file using secure FTP: switch:admin> configdownload -vf -p sftp \ 10.32.248.119,jdoe,/temp/switch-conf_66.txt,mypassword To attempt to download the Virtual Fabric configuration interactively to a switch with configured Admin Domains: switch:admin> configdownload -vf -p sftp \ 10.32.248.119,jdoe,/temp/switch-conf_66.txt,mypassword *** CAUTION *** This command is used to download the VF configuration to the switch. Afterwards, the switch will be automatically rebooted and the new VF settings will be used. You will then need to run configdownload again to install the configuration(s) for any logical switch(s) that are setup in the new VF configuration. Please note that Virtual Fabrics and Admin Domains are mutually exclusive and are not supported at the same time on a switch. If any Admin Domains are configured on the switch, the configdownload operation will fail. Do you want to continue [y/n]: y [email protected]'s password: Error: configDownload operation failed. VF/AD Conflict detected. Please remove all ADs before downloading the VF configuration to the switch. 2011/06/12-17:14:02, [CONF-1023], 3637, FID 128, INFO, sw0, configDownload failed for VF config parameters. configDefault, configList, configShow, configUpload, configure, configRemove Fabric OS Command Reference 145 53-1002746-01