Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 834
Displays the current Routing Info SE memory., portshow fciptunnel 16
View all Dell Brocade 6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 834 highlights
2 portShow EXAMPLES -rte Displays the current Routing Info SE memory. To display FCIP tunnel configuration parameters on the Brocade 7800 with Ficon enabled: switch:admin> portshow fciptunnel 16 Tunnel ID: 16 Tunnel Description: Admin Status: Enabled Oper Status: Up Compression: On (Aggressive) Fastwrite: Off Tape Acceleration: Off TPerf Option: Off IPSec: Disabled QoS Percentages: High 50%, Med 30%, Low 20% Remote WWN: Not Configured Local WWN: 10:00:00:05:1e:a5:54:bd Peer WWN: 00:00:00:00:00:00:00:00 Circuit Count: 4 Flags: 0x00000000 FICON: On FICON XRC: Off FICON Tape Write: On FICON Tape Read: On FICON TinTir Emul: On FICON Dvc Acking: On FICON Read BLK-ID: On FICON Teradata Write: On FICON Teradata Read: On Tape Write Pipe: 63 Tape Read Pipe: 65 Tape Write Devs: 32 Tape Read Devs: 32 Tape Write Timer: 300 Tape Max Chain: 3200000 FICON OXID Base: 0x8000 FICON Debug Flags: 0xf7c90000 To display an FCIP tunnel with FICON disabled: switch:admin> portshow fciptunnel 16 Tunnel ID: 16 Tunnel Description: Admin Status: Enabled Oper Status: Up Compression: On (Aggressive) Fastwrite: Off Tape Acceleration: Off TPerf Option: Off IPSec: Disabled QoS Percentages: High 50%, Med 30%, Low 20% Remote WWN: Not Configured Local WWN: 10:00:00:05:1e:a5:54:bd Peer WWN: 00:00:00:00:00:00:00:00 Circuit Count: 4 Flags: 0x00000000 FICON: Off 806 Fabric OS Command Reference 53-1002746-01