Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 362

2 fcrLsanMatrix EXAMPLES To zero out the database, execute the following commands: - fcrlsanmatrix --add -lsan 0 0 - fcrlsanmatrix --add -fcr 00:00:00:00:00:00:00:00 00:00:00:00:00:00:00:00 - fcrlsanmatrix --apply -all • In a dual backbone configuration, execute fcrlsanmatrix --fabricview on the FCR switches to confirm that the shared edge fabric FIDs have the same access in both backbones. • Execute fcrlsanmatrix --display -lsan | -fcr and fcrproxydevshow -a. Check that the LSAN Binding matrix in the cache is not in conflict with the existing import/export devices that are displayed on the FCR switch. If there is a conflict, do one of the following: - Update the LSAN/FCR Binding matrix in the cache to allow access for the FIDs that have imported devices. - Remove the conflicting import/export devices by updating the LSAN zone in the edge fabrics. - Disable the conflicting devices. Error message (2) There may be other FCR switches in the backbone that do not support the LSAN Binding feature or do not have the same fcrlsanmatrix settings. Please refer to the man page for the corrective action. Corrective actions: • Verify that all FCR switches in the backbone support the LSAN Binding features. • Execute fcrlsanmatrix --fabricview to confirm that all the switches in the backbone have the same LSAN Binding matrix. If not, clear the LSAN Binding feature on all the switches and reapply the same LSAN Binding matrix on all the FCR switches in the backbone. • In a dual backbone configuration, use fcrlsanmatrix --fabricview on the FCR switches to confirm that the shared edge fabric FIDs have the same access in both backbones. Refer to the Fabric OS Message Reference manual for further diagnostic information. To add the LSAN Zone Matrix data (For the following example, assume that the backbone has the following online edge fabrics (FIDs): 1, 2, 4, 5, 7, 8, and 10. Currently, FIDs 14 and 19 are not available.): switch:admin> fcrlsanmatrix --add -lsan 4 5 switch:admin> fcrlsanmatrix --add -lsan 4 7 switch:admin> fcrlsanmatrix --add -lsan 10 14 switch:admin> fcrlsanmatrix --add -lsan 10 19 To remove an entry from the LSAN matrix: switch:admin> fcrlsanmatrix --remove -lsan 10 14 To display the information from the cache: switch:admin> fcrlsanmatrix --display -lsan Fabric ID 1 Fabric ID 2 4 5 4 7 10 19 To apply the changes persistently: switch:admin> fcrlsanmatrix --apply -lsan 334 Fabric OS Command Reference 53-1002746-01