Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 679
portcfg mgmtif ge0 create 192.168.3.10 255.255.255.0
View all Dell Brocade 6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 679 highlights
portCfg 2 To modify an existing circuit so it becomes the listener: switch:admin> portcfg fcipcircuit 16 modify 2 -C 1 !!!! WARNING !!!! Modify operation can disrupt the traffic on the fcipcircuit specified \ for a brief period of time. This operation will bring the existing \ circuit down (if circuit is up) before applying new configuration. Continue with Modification (Y,y,N,n): [ n]y Operation Succeeded To modify an existing circuit so it becomes the initiator (the following example uses the string option): switch:admin> portcfg fcipcircuit 16 \ modify 2 --connection-type initiator !!!! WARNING !!!! Modify operation can disrupt the traffic on the fcipcircuit specified \ for a brief period of time. This operation will bring the existing \ circuit down (if circuit is up) before applying new configuration. Continue with Modification (Y,y,N,n): [ n]y Operation Succeeded To configure an IPSec-enabled tunnel to connect with an IPSec-configured tunnel in legacy mode: switch:admin> portcfg fciptunnel 8/12 modify --legacy 1 !!!! WARNING !!!! Modify operation can disrupt the traffic on the fciptunnel specified \ for a brief period of time. This operation will bring the existing \ tunnel down (if tunnel is up) before applying new configuration. Continue with Modification (Y,y,N,n): [ n]y Tunnel 8/12 modify: Operation Succeeded To create inband management interfaces for two Brocade 7800 switches on the same subnet: 1. Configure each switch. switch:admin> portcfg mgmtif ge0 create 192.168.3.10 255.255.255.0 switch:admin> portcfg mgmtif ge0 create 192.168.3.20 255.255.255.0 2. Access the switch through the external inband management interface. linux# telnet 192.168.3.10 To create inband management interfaces for two Brocade 7800 switches on different subnets connected by two routers: 1. Configure the inband management interfaces on the first switch. switch:admin> portcfg mgmtif ge0 create 192.168.1.10 255.255.255.0 2. Configure the inband management route for the management station. switch:admin> portcfg mgmtroute ge0 create 192.168.3.0 \ 255.255.255.0 192.168.1.250 3. Configure the inband management interfaces on the second switch. switch:admin> portcfg mgmtif ge0 create 192.168.2.20 255.255.255.0 Fabric OS Command Reference 651 53-1002746-01