Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 744
QoS Percentages: High 50%, Med 30%, Low 20, switchshow | grep EX-Port, portcfgshow 16
View all Dell Brocade 6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 744 highlights
2 portCfgShow To display the QoS configuration for an EX_Port (QoS over FCR deployment): switch:admin> switchshow | grep EX-Port 16 16 id N4 Online FC EX-Port \ 10:00:00:05:1e:41:4a:45 "Tom_100" (fabric id = 25 )(Trunk master) switch:admin> portcfgshow 16 Area Number: 11 Octet Speed Combo: 1(16G|8G|4G|2G) Speed Level: AUTO(HW) Fill Word(On Active) 0(Idle-Idle) Fill Word(Current) 0(Idle-Idle) AL_PA Offset 13: OFF Trunk Port ON Long Distance LS VC Link Init OFF Desired Distance 10 Km Reserved Buffers 86 Locked L_Port OFF Locked G_Port OFF Disabled E_Port OFF ISL R_RDY Mode OFF RSCN Suppressed OFF Persistent Disable OFF LOS TOV enable OFF NPIV capability ON QOS E_Port AE Port Auto Disable: OFF Rate Limit OFF EX Port ON Mirror Port OFF Credit Recovery ON F_Port Buffers OFF NPIV PP Limit: 126 CSCTL mode: OFF Fault Delay 1(1.2sec) D-Port mode: ON D-Port over DWDM: ON FEC active To display an FCIP Tunnel on a Brocade FX8-24 with and without IPSec information (In the following examples, IPSec is in legacy mode): switch:admin> portcfgshow fciptunnel 1/12 -ipsec Tunnel ID: 1/12 Tunnel Description: Compression: Off Fastwrite: Off Tape Acceleration: Off TPerf Option: Off IPSec: Enabled (legacy) IPSec Key: '12345678901234567890123456789012' QoS Percentages: High 50%, Med 30%, Low 20% Remote WWN: Not Configured Local WWN: 10:00:00:05:1e:52:fe:00 Flags: 0x00000000 FICON: Off 716 Fabric OS Command Reference 53-1002746-01