Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 958

2 secPolicyShow secPolicyShow Displays an existing security policy including the FCS policy. SYNOPSIS secpolicyshow ["policy_set"[", name"]] DESCRIPTION NOTES OPERANDS EXAMPLES Use this command to display the members of an existing policy in the Active or Defined security policy set. The command can be issued from all FCS switches. This command displays the policy database one page at a time. Use the secPolicyDump command to display the policy database without page breaks. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: "policy_type" Specify which policy to display, in quotation marks. Valid values are "Active", "Defined", or an asterisk (*) for both Active and Defined. This operand is optional. If not specified, all databases are displayed. "name" Specify the name of the security policy you want to view, in quotation marks. The specified policy name must be capitalized. This operand is optional. Valid values for this operand include the following: • DCC_POLICY_nnn • FCS_POLICY • SCC_POLICY The DCC_POLICY_nnn name has the common prefix DCC_POLICY_ followed by a string of user-defined characters. These characters do not have to be capitalized like regular policy names, but they are case-sensitive. To display all security policies from active databases: switch:admin> secpolicyshow "active" ACTIVE POLICY SE FCS_POLICY Pos Primary WWN DId swName 1 Yes 10:00:00:60:69:30:15:5c 1 primaryfcs 2 No 10:00:00:60:69:30:1e:62 4 switch 930 Fabric OS Command Reference 53-1002746-01