Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 955

secPolicyRemove 2 secPolicyRemove Removes members from an existing security policy. SYNOPSIS secpolicyremove "name" ,"member[;member...]" DESCRIPTION NOTES OPERANDS Use this command to remove one or more members from an existing security policy. It is not possible to remove all members from the FCS_POLICY; the local switch WWN cannot be deleted from the FCS policy. In the case of SCC policy, if it is empty after removing all members, all access to the switch itself would be disallowed. If an FCS policy is enabled, this command must be issued from the primary FCS switch. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: "name" Specify the name of an existing policy you want to remove members from. This operand is required. Valid values for this operand include the following: • DCC_POLICY_nnn • FCS_POLICY • SCC_POLICY The specified policy name must be capitalized. The DCC_POLICY policy name has the common prefix DCC_POLICY_ followed by a string of user-defined characters. These characters do not have to be capitalized like regular policy names, but are case-sensitive. "member" Specify a member or list of members to delete from the policy. The list must be enclosed in quotation marks; members must be separated by semicolons. This operand is required. Depending on the policy type, members can be specified using IP address, WWN, domain, or switch name. WWN Member Policy Types The following policy types require members be specified by WWN address: • FCS_POLICY • SCC_POLICY These policy types require member IDs be specified as WWN strings, domains, or switch names. If domain or switch names are used, the switches associated must be present in the fabric or the command fails. DCC_POLICY Members The DCC_Policy_nnn is a list of devices associated with a specific switch and port combination. The device is specified with a WWN string. The switch and port combination must be specified in the switch port format where switch can be specified by switch WWN, domain, or switch name. The port parameter can be specified by port number separated by commas, and enclosed in either brackets or parentheses: for example, (2, 4, 6). Ports enclosed in brackets include the devices currently attached to those ports. The following examples illustrate several ways to specify the port values: (1-6) Selects ports 1 through 6. Fabric OS Command Reference 927 53-1002746-01