Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 680
con portCfgShow, portCmd, switchShow, portcfg vlantag 10/xge0 add 172.16.30.40 30--mgmt
View all Dell Brocade 6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 680 highlights
2 portCfg SEE ALSO 4. Configure the inband management route for the management station. switch:admin> portcfg mgmtroute ge0 create 192.168.3.0 \ 255.255.255.0 192.168.2.250 5. On the Management Station, add route entries to get to the Brocade 7800 external inband management interfaces. linux# route add 192.168.1.0 netmask 255.255.255.0 gw 192.168.3.250 linux# route add 192.168.2.0 netmask 255.255.255.0 gw 192.168.3.250 6. Access the 7800 switches through the external inband management interfaces. linux# telnet 192.168.1.10 To delete an inband management interface: switch:admin> portcfg mgmtif ge0 delete 192.168.3.10 255.255.255.0 To delete a management route: switch:admin> portcfg mgmtroute ge0 delete 192.168.3.0 255.255.255.0 192.168.2.250 To disable and re-enable an inband management interface: switch:admin> portcfg mgmtif ge0 disable switch:admin> portcfg mgmtif ge0 enable. To configure a VLAN tag for an inband management port: switch:admin> portcfg vlantag 10/xge0 add 172.16.30.40 30 0 --mgmt Operation Succeeded switch:admin> portshow vlantag all Port: 10/xge0 Interface Address VlanId L2CoS Flags Destination Address 172.16.30.80 30 0 Perm 172.16.50.80 172.16.30.40 30 0 Perm Net Mgmt 0.0.0.0 To enable the autonegotiation of 1GbE port: switch:admin> portcfg autoneg 1/ge2 --enable Operation Succeeded switch:admin> portshow autoneg 1/ge2 Auto-Negotiation Configuration: Port: 1/ge2 Auto-Negotiate: Enabled configure, portCfgShow, portCmd, portShow, switchShow 652 Fabric OS Command Reference 53-1002746-01