Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 781

portLogClear 2 portLogClear Clears the port log. SYNOPSIS portlogclear DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to clear the port log. It is recommended that you clear the port log before triggering an activity so that the log displays only the log events related to that activity. If the port log is disabled, portLogClear enables it. The port log is disabled automatically when certain errors occur to allow the collection of all the information needed to understand the cause of the error. When the port log is disabled, the events already present in the log are preserved, but new events are not collected. The following errors disable the port log: • FCPH, EXCHBAD • FCPH, EXCHFREE • NBFSM, DUPEPORTSCN • UCAST, RELICPDB Refer to the Fabric OS Message Reference for more information on these errors. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. None To clear the port log: switch:admin> portlogclear switch:admin> portlogshow port log is empty portLogDump, portLogShow Fabric OS Command Reference 753 53-1002746-01