Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 942

2 secPolicyAdd OPERANDS EXAMPLES This command has the following operands: "name" Specify the name of an existing policy to which you want to add members. Valid values for this operand include the following: • DCC_POLICY_nnn • FCS_POLICY • SCC_POLICY The specified policy name must be capitalized. The DCC_POLICY_nnn name has the common prefix DCC_POLICY_ followed by a string of user-defined characters. These characters do not have to be capitalized like regular policy names, but they are case-sensitive. "member" Specify a list of one or more member switches to be included in the security policy. The list must be enclosed in quotation marks; members must be separated by semicolons. Depending on the policy type, members are specified as follows. FCS_POLICY or SCC_POLICY Members This policy type requires member IDs to be specified as WWN strings, Domains, or switch names. If Domain IDs or switch names are used, the switches associated must be present in the fabric or the command fails. DCC_POLICY Members The DCC_POLICY_nnn is a list of device port names associated with a specific switch and port index combination. An empty DCC_POLICY does not stop access to the switch. The device port name is specified by its port WWN string. The switch and port index combination must be in the switch port format, where switch can be specified as a WWN, a domain, or a switch name, and port is specified by port numbers separated by commas and enclosed in either brackets or parentheses; for example, (2, 4, 6). Ports enclosed in brackets include the devices currently attached to those ports. The following examples illustrate several ways to specify the port values: (1-6) Selects ports 1 through 6. (*) Selects all ports on the switch. [3, 9] Selects ports 3 and 9 and all devices attached to those ports. [1-3, 5] Selects ports 1 through 3 and 5 and all devices attached to those ports. [*] Selects all ports on the switch and devices currently attached to those ports. -legacy Adds a security policy with the desired order. To add a member to the SCC_POLICY using the device WWN: primaryfcs:admin> secpolicyadd "SCC_POLICY", \ "12:24:45:10:0a:67:00:40" Member(s) have been added to SCC_POLICY. 914 Fabric OS Command Reference 53-1002746-01