Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 397

ficonShow 2 NOTES OPERANDS Time Stamp Type Type Number Displays the timestamp, expressed in date format. Same as Port Type. Displays the type number of the self-describing node. It also describes the machine type. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: database Specify the database to display. This operand is required. Valid values include the following RNID Device node identification. LIRR Devices registered to receive link incident reports. Entries can have the following flags: -C* A user-configured LIRR entry defined as current (set with the ficonCfg command). -C A LIRR entry defined by the management server demon as current based on order. -S A LIRR entry defined by the management server demon as secondary. SwitchRNID Switch node identification. RLIR Link incident reports. ILIR Implicit link incident reports. fabric Displays FICON database information for the entire fabric. This operand is optional; if omitted, only local members of the named database are displayed. table Displays RNID data in table format. port Displays RNID data for the specified port. port_index Specifies the port index number in decimal or hexadecimal format. Fabric OS Command Reference 369 53-1002746-01