Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 904

2 portZoneShow portZoneShow Displays the enforced zone type of the F_Ports and FL_Ports of a switch. SYNOPSIS portzoneshow DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to display the enforced zone type of the F_Ports and FL_Ports of a switch. Output shows virtual port number (decimal), physical port number (decimal), online status, and if online, port type. If the current zone configuration has been disabled by cfgDisable, the fabric is in non-zoning mode, in which all devices see each other. When default zoning is enabled with "No Access" mode, "No Effective configuration: (No Access)" is displayed. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. None To display the zone membership information of ports: switch:user> portzoneshow [OUTPUT TRUNCATED] PORT: 160 (160) Offline PORT: 161 (161) Offline PORT: 162 (162) Offline PORT: 163 (163) Offline PORT: 164 (164) Offline PORT: 165 (165) Offline PORT: 166 (166) Offline PORT: 167 (167) Offline PORT: 168 (168) FL-Port Enforcement: HARD WWN \ defaultHard: 0 IFID: 0x4332000a PORT: 169 (169) Offline PORT: 170 (170) Offline PORT: 171 (171) Offline PORT: 172 (172) Offline PORT: 173 (173) Offline PORT: 174 (174) Offline PORT: 175 (175) Offline PORT: 176 (176) F-Port Enforcement: HARD WWN \ defaultHard: 0 IFID: 0x4342002a PORT: 177 (177) Offline PORT: 178 (178) Offline PORT: 179 (179) Offline PORT: 180 (180) Offline (output truncated) cfgShow, switchShow 876 Fabric OS Command Reference 53-1002746-01