Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 640

2 perfShowPortEEMask perfShowPortEEMask Displays the current address mask for end-to-end performance monitors on a port. SYNOPSIS perfshowporteemask [slot/]port DESCRIPTION NOTES OPERANDS EXAMPLES Use this command to display the current mask shared across all end-to-end (EE) performance monitors of a port. There are only two commands that can modify the value of the EE mask: perfSetPortEEMask and perfCfgRestore. The end-to-end mask has 12 fields: TxSID Domain: on TxSID Area: on TxSID ALPA: on TxDID Domain: on TxDID Area: on TxDID ALPA: on RxSID Domain: on RxSID Area: on RxSID ALPA: on RxDID Domain: on RxDID Area: on RxDID ALPA: on The fields that are marked "on" trigger end-to-end monitors. The default value of the EE mask for all fields is "on." This command requires an Advanced Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operand: slot For bladed systems only, this operand specifies the slot number of the port on which the monitor is to be displayed, followed by a slash (/). port Specifies the number of the port on which the monitor is to be displayed, relative to its slot for bladed systems. Use switchShow for a list of valid ports. To display the end-to-end mask on a port: switch:admin> perfshowporteemask 2/4 The EE mask on port 20 is set by application NONE TxSID Domain: on TxSID Area: on TxSID ALPA: on TxDID Domain: on TxDID Area: on TxDID ALPA: on RxSID Domain: on 612 Fabric OS Command Reference 53-1002746-01