Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 283

errDump 2 NOTES OPERANDS EXAMPLES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: --all Displays messages for the entire chassis for a user with admin and chassis permissions. This operand is optional; if omitted, the messages for the current logical switch context are displayed. --count number Displays messages based on count value. --reverse Displays messages in reversed order. This operand is optional; if omitted, the messages display in chronological order. --severity severity Displays messages based on severity. 0 Displays critical, error, warning, and informational messages. 1 Displays critical messages. 2 Displays error messages. 3 Displays warning messages. 4 Displays informational messages. --slot slotnum Displays messages based on slot. --attributes attribute Displays messages with the given attribute. Valid attributes values are 0(ALL) and 1(FFDC). --message msgID Displays all raslog messages based on the message ID. --help Displays command usage. To display the error log for the chassis: switch:admin> errdump --all Fabric OS: v7.0.0 2010/12/17-22:29:17, [SEC-1203], 9036, CHASSIS, INFO,\ Spir_67, Login information : Login successful via \ TELNET/SSH/RSH. IP Addr: 10.106.7.62 2010/12/17-22:29:17, [ZONE-1022], 9037, CHASSIS, INFO, \ Spir_67, The effective configuration has changed to meh. 2010/12/17-22:29:17, [FABR-1001], 9041, CHASSIS, WARNING, \ Fabric OS Command Reference 255 53-1002746-01