Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 962

2 secStatsShow secStatsShow Displays one or all security statistics. SYNOPSIS secstatsshow [name[,"domain[;domain]"]] DESCRIPTION NOTES OPERANDS Use this command to display one or all security statistics. This command can be issued on any switch to display local security statistics. If an FCS policy is enabled and secStatsShow is issued on the primary FCS switch, this command can retrieve and display the security statistics for any or all switches in the fabric. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. When invoked without operands, this command displays the security statistics on the local switch or chassis. The following operands are optional: name Specify the name of the security statistic you want to view. The specified policy name must be capitalized. If executed on the primary FCS, specify an asterisk (*) to represent all security policies in the fabric. Valid values for this operand include the following: • TELNET_POLICY • HTTP_POLICY • SCC_POLICY • DCC_POLICY • LOGIN • INVALID_CERT • AUTH FAIL • TS_OUT_SYNC • NO_FCS • INCOMP_DB • ILLEGAL_CMD To access DCC policies, enter DCC_POLICY. Violations are not tracked for individual DCC policies. The statistics for all DCC_POLICY violations are grouped together. domain Specify one or more domains for which to display the security statistics. Specify an asterisk (*) in quotation marks to represent all switches in the fabric or specify a list of domains separated by semicolons. This option can only be executed when an FCS policy is enabled and the command is issued from the primary FCS switch. When domain is specified, the name operand is required. 934 Fabric OS Command Reference 53-1002746-01