Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 913

rasMan 2 rasMan Displays RASlog message text and documentation. SYNOPSIS rasman message_id rasman --help DESCRIPTION NOTES OPERANDS EXAMPLES Use this command to display documentation for a specified RASlog message. The message is specified by its message ID. The command output is identical to the documentation provided in the Fabric OS Message Reference. For each message, the command displays the following information: MESSAGE Displays the message text. MESSAGE TYPE Displays the message type. The message type can be one or more of the following: LOG, FFDC, or AUDIT. CLASS A class value is displayed for audit messages only. Supported audit classes include SECURITY, FIRMWARE, FABRIC FW (Fabric Watch), LS (logical switch), CLI, MAPS (internal use only), and RAS. SEVERITY Indicates the message severity as one of the following: INFO, ERROR, WARNING, CRITICAL. PROBABLE CAUSE Describes what may be causing the the message. RECOMMENDED ACTION Describes the recommended action. This command is available to all supported Brocade roles, including root. This command displays only external messages in the numeric range of 1000-4999. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: message_id Specifies the message ID in the following format: -. The message ID is case sensitive and should be entered exactly as shown in the RASlog message displayed on the console. For example, FW-1140 is a valid message ID, but fw-1140 is not valid. --help Displays the command usage. To display documentation for a ZONE audit message: switch:admin> rasman ZONE-3018 Log Messages ZONE-3018(7m) MESSAGE ZONE-3018 - Event: Status: success, Info: Fabric OS Command Reference 885 53-1002746-01