Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 1078

2 thConfig EE Monitors the End-to-End Performance Monitor class. Valid areas for the EE class include the following: RXP Monitors receive performance as the percentage of word frames traveling from the configured SID to the DID. TXP Monitors transmit performance as the percentage of word frames traveling from the configured DID to the SID. --set class -area area Configures Fabric Watch thresholds for monitoring a specified class and area. When configuring Fabric Watch thresholds, you must specify a class and an area. The following operands are optional and valid only with the --set option; if omitted, the default Fabric Watch configuration is used. Default parameters vary depending on the area and platform. Refer to the Fabric Watch Administrator's Guide for specific details. -timebase time_base Specifies the time interval between two samples to be compared. Valid intervals include the following: day Samples are compared once a day. hour Samples are compared once every hour. minute Samples are compared once every minute. none Samples are not compared. -sfptype sfp_type Configures and manages thresholds and alerts for 10G SFPs, 16G SFPs and 16G QSFPs. Fabric Watch applies thresholds based on the serial numbers of the SFP types. If the SFP serial number cannot be determined, Fabric Watch applies pre-Fabric OS v7.0.0 thresholds. This operand is optional and supported only on Condor 3-based platforms; if omitted, legacy thresholds and actions apply to 8G SPPs. Valid SFP types include the following: 16GSWL Brocade-branded 16G SFP with serial number HA. 16GLWL Brocade-branded 16G SFP with serial number HD. QSFP Brocade-branded 16G QSFP. 10GSWL Brocade-branded 10G SFP with serial number KA. 10GLWL Brocade-branded 10G SFP with serial number KD. -highth -value value Specifies the high threshold value for triggering a specified alert action. To change the default value, provide an integer value. 1050 Fabric OS Command Reference 53-1002746-01