Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 286

2 errFilterSet errFilterSet Sets a filter for an error log destination. SYNOPSIS errfilterset [-d destination][-v severity] DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to set a filter for an error log destination. A filter is set based on the severity level of the messages. When used without operands, this command displays the filters that are currently in configured. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: -d destination Specifies the destination for the filter. The string console is the only valid value at this time. -v severity Specifies the minimum severity level of the message to pass through the filter. Valid values are INFO, WARNING, ERROR, or CRITICAL. Input values are not case-sensitive. To display the current filter settings: switch:admin> errfilterset console: filter severity = WARNING To set the filter severity level for the console: switch:admin> errfilterset -d console -v warning errDump, errShow 258 Fabric OS Command Reference 53-1002746-01