Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 683

port[-port] --enable --disable --add --remove --addall --removeall --addexcept --show --suspend --resume --help option LOSN LOSNG OLS NOS LIP portCfgAutoDisable 2 Specifies a port or a port range, relative to the slot number on bladed systems, for example, 5/17-29. Enables the autodisable feature on the specified ports. Disables the autodisable feature on the specified ports. Specifies one or more trigger conditions that will disable the specified ports. Trigger conditions must be separated by a space, for example, LOSN OLS LIP. Trigger conditions are case insensitive. Removes one or more trigger conditions from the port autodisable configuration. Adds all supported trigger conditions to the port autodisable configuration. Removes all supported trigger conditions from the port autodisable configuration. This command removes the triggers only; it does not disable the port autodisable flag. Adds all supported trigger conditions to the port autodisable configuration except the one specified . Displays the port autodisable configuration. Suspends the current port autodisable configuration temporarily. Resumes the suspended port autodisable configuration. Displays command usage. Specify one or more the following options (supported with the --add, --remove, and --addexcept operands): Loss of Sync Loss of Signal Offline Primitive Sequence Not Operational Primitive Sequence Loop Initialization Primitive Sequence Fabric OS Command Reference 655 53-1002746-01