Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 77

aliAdd 2 aliAdd Adds a member to a zone alias. SYNOPSIS aliadd "aliName","member[; member...]" DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to add one or more members to an existing zone alias. The alias member list cannot contain another zone alias. This command changes the defined configuration. For the change to become effective, enable the zone configuration with the cfgEnable command. For the change to be preserved across switch reboots, save the zone configuration to nonvolatile memory with the cfgSave command. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. When an FCS policy is enabled, this command can be issued only from the primary FCS switch. The following operands are required: "aliName" Specify the name of a zone alias, enclosed in double quotation marks. "member" Specify a member or list of members to be added to the alias, enclosed in double quotation marks. Members must be separated by semicolons. An alias member can be specified by one or more of the following methods: • A switch domain and port index pair. Use switchShow for a list of valid port index numbers. • A world wide name (WWN). To add members to zone aliases array1, array2, and loop1: switch:admin> aliadd "array1", "1,2" switch:admin> aliadd "array2", "21:00:00:20:37:0c:72:51" aliCreate, aliDelete, aliRemove, aliShow Fabric OS Command Reference 49 53-1002746-01