Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 616

2 pathInfo EXAMPLES Source port Destination port Source pid Destination pid Basic stats Extended stats Trace reverse path Source route Timeout Specifies the port whose path to the destination domain is traced, specified as the port index. If unspecified, the value defaults to -1 (embedded port). Specifies the port on the destination switch for the path being traced. If unspecified, the value defaults to -1 (embedded port) Specifies the source ID of the originator device in hexadecimal format. Specifies the destination ID of the proxy device in hexadecimal format. Whether basic statistics are generated on every link; the default is no. Whether extended statistics are generated on every link; the default is no. Specifies the path information in reverse direction; the default is no. Specifies a sequence of switches or ports that the pathInfo frame should traverse; the default is no. If an output port to the next hop is specified, you are not prompted for the domain of the next switch. The domain is determined by the port. The maximum time allowed waiting for the response in milliseconds. The default is 10000 milliseconds. To display basic path information to a specific domain in command line mode: switch:admin> pathinfo 91 Target port is Embedded Hop In Port Domain ID (Name) Out Port BW Cost 0 E 9 (web226) 2 1G 1000 1 3 10 (web229) 8 1G 1000 2 8 8 (web228) 9 1G 1000 3 6 91 (web225) E - - To display basic path information in traceroute format: switch:admin> pathinfo 91 -t traceroute to domain 91(web225) , 25 hops Hop Domain ID (Name) time taken for the hop 1 10 (web229) 0.0331 us To display basic path information in traceroute format with reverse path option: switch:admin> pathinfo 4 -r -t Target port is Embedded Hop Domain ID (Name) Time/hop 1 11 (mps_daz_1) 32882 usec 2 4 (METEOR) 32882 usec 3 11 (mps_daz_1) 32882 usec 4 97 (pulsar055) 32882 usec 588 Fabric OS Command Reference 53-1002746-01