Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 389

ficonCupShow 2 ficonCupShow Displays FICON-CUP parameters for a switch. SYNOPSIS ficoncupshow fmsmode ficoncupshow modereg [bitname] ficoncupshow MIHPTO ficoncupshow DD_LOG ficoncupshow diag_info ficoncupshow hlthchk_log ficoncupshow LP DESCRIPTION NOTES OPERANDS Use this command to display FICON-CUP (Control Unit Port) parameters for a switch. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: fmsmode Display the FICON Management Server (FMS) mode for the switch. modereg Display the FICON-CUP mode register. If no operand is specified, all mode register bit settings are displayed. If a mode register bit name is specified, then only the value of that bit is displayed. A value of 1 indicates that a given mode register bit is set, and 0 indicates that it is not set. The following operand is optional: bitname Displays the specified mode register bit as either set (1) or not set (0). Valid values for bitname include the following: POSC Programmed offline state control UAM User alert mode ASM Active=saved mode DCAM Director clock alert mode ACP Alternate control prohibited HCP Host control prohibited Fabric OS Command Reference 361 53-1002746-01