Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 884

2 portSwapShow portSwapShow Displays the state of the PortSwap feature. SYNOPSIS portswapshow DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to display the state of the PortSwap feature and information about swapped ports. If portSwap is enabled and ports have been swapped, the command displays the enabled status as well as the swapped ports and the new port address (the 24-bit PID) for these ports. If portSwap is disabled, the command shows the disabled status and indicates whether or not swapped ports exist on the switch. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. None To display a switch with PortSwap enabled and information for swapped ports: Console message: 2009/10/09-21:22:45, [PSWP-1001], 482, SLOT 6 | FID 51, INFO, DCX_105_51, PID for port 12/0 and port 12/63 are swapped. New PID for port 12/0 is 0x697000 and port 12/63 is 0x69e3c0. switch:admin> portswapshow PortSwap is enabled Slot Slotport Swport Address 12 0 112 0x697000 12 63 895 0x69e3c0 To display the portSwap status on a switch when the feature is disabled and no ports are swapped: switch:admin> portswapshow PortSwap is disabled. Existing Portswap condition is still effective. Only future Portswap operations are not allowed. No ports have been swapped portSwap, portDisable, portEnable, portShow, portSwap, portSwapDisable, portSwapEnable, switchShow 856 Fabric OS Command Reference 53-1002746-01