Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 953

secPolicyFCSMove 2 secPolicyFCSMove Moves a member in the FCS policy. SYNOPSIS secpolicyfcsmove [from, to] DESCRIPTION NOTES OPERANDS EXAMPLES Use this command to move an FCS member from one position to another position in the FCS list. Only one FCS can be moved at a time. The first FCS switch in the list that is also present in the fabric is the Primary FCS. If a backup FCS is moved to the first position, it becomes the primary FCS after activation. An FCS policy must be enabled to execute this command, and the command must be issued from the primary FCS switch. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: from Specify the position of the FCS switch you want to move. to Specify the position to which you want to move the FCS switch. To move the backup FCS switch from position 2 to position 3 in the FCS list (interactively): switch:admin> secpolicyfcsmove Pos Primary WWN DId swName. 1 Yes 10:00:00:60:69:10:02:18 1 switch5. 2 No 10:00:00:60:69:00:00:5a 2 switch60. 3 No 10:00:00:60:69:00:00:13 3 switch73. Please enter position you'd like to move \ from : (1..3) [1] 2 Please enter position you'd like to move \ to : (1..3) [1] 3 DEFINED POLICY SET FCS_POLICY Pos Primary WWN DId swName 1 Yes 10:00:00:60:69:10:02:18 1 switch5. 2 No 10:00:00:60:69:00:00:13 3 switch73. 3 No 10:00:00:60:69:00:00:5a 2 switch60. To move Backup FCS switch from position 3 to position 1 in the FCS list(non-interactively): switch:admin> secpolicyshow ACTIVE POLICY SET 1 Yes 10:00:00:05:1e:39:5f:67 2 switch1 2 No 10:00:00:05:1e:04:ef:0e 4 switch2 Fabric OS Command Reference 925 53-1002746-01