Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 58

2 ag --prefdel "F_Port [;F_Port2;...]" N_Port Deletes the preferred Secondary N_Port for the specified F_Ports. The list of F_Ports to be deleted from the secondary mapping must be enclosed in double quotation marks. Port numbers must be separated by semicolons. --prefshow Displays the preferred Secondary N_Port for all F_Ports. --adsset "F_Port [;F_Port2;...]" "WWN [;WWN2;...]" Sets the list of devices that are allowed to login to a specified set of F_Ports. Devices are specified by their world wide names. Lists must be enclosed in double quotation marks. List members must be separated by semicolons. The maximum number of entries in the allowed device list is twice the per port maximum login count. Replace the WWN list with an asterisk (*) to indicate all access on the specified F_Port list. Replace the F_Port list with an asterisk (*) to add the specified WWNs to all the F_Ports' allow lists. A blank WWN list ("") indicates no access. ADS policy must be enabled for this command to succeed. --adsadd "F_Port [;F_Port2;...]" "WWN [;WWN2;...]" Adds the specified WWNs to the list of devices allowed to login to the specified F_Ports. Lists must be enclosed in double quotation marks. List members must be separated by semicolons. Replace the F_Port list with an asterisk (*) to add the specified WWNs to all the F_Ports' allow lists. ADS policy must be enabled for this command to succeed. --adsdel "F_Port [;F_Port2;...]" "WWN [;WWN2;...] Deletes the specified WWNs from the list of devices allowed to login to the specified F_Ports. Lists must be enclosed in double quotation marks. List members must be separated by semicolons. Replace the F_Port list with an asterisk (*) to remove the specified WWNs from all the F_Ports' allow lists. ADS policy must be enabled for this command to succeed. --adsshow Displays the list of allowed device WWNs for all F_Ports. --persistentalpaenable 1 | 0 mode Configures the persistent ALPA feature. Once enabled, the ALPA parts of all device PIDs become persistent regardless of whether they were logged in before or after the persistent ALPA feature was enabled. ALPA persistence ensures that there is no inconsistency between logged in devices. The persistent ALPA feature is disabled by default. 1 | 0 Specify 1 to enable persistent ALPA. Specify 0 to disable the feature. mode Specifies the manner in which the ALPA is obtained in the event that the ALPA value is already taken by another host. Valid modes include the following: -s Specifies a stringent ALPA request mode. In stringent mode, the login is rejected if the ALPA is not available. -f Specifies a flexible ALPA request mode. In flexible mode, the host login is accepted either with the requested ALPA value or with a different ALPA value if the requested ALPA is not available. --printalpamap F_Port Displays the database entry for the specified port. An F_Port must be specified. The output displays the PWWN-to-host-ALPA mapping. 30 Fabric OS Command Reference 53-1002746-01