Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 593

nsShow 2 nsShow Displays local Name Server (NS) information. SYNOPSIS nsshow [-r][-t] DESCRIPTION Use this command to display local NS information about devices connected to a switch. If no information is available for the switch, the command displays the following message: "There is no entry in the Local Name Server." Use nsAllShow to display NS information for all switches in the fabric. Each line of output displays the following information: Type Displays U for unknown, N for N_Port, NL for NL_Port. PID Displays the 24-bit Fibre Channel address of the device. COS Displays the Class of Service levels supported by the device. This can be class 1, class 2, or class 3. The command displays only the numeric values, 1, 2, and/or 3. A device can support multiple CoS levels. PortName Displays the device port world wide name (WWN). NodeName Displays the device node WWN. TTL Displays the time-to-live, in seconds, for cached entries or NA (not applicable) if the entry is local. SCR Displays the state change registration of the device. This field displays only with the -r option. Device type Displays the device type if -t is specified. Fabric Port Name Displays the F_Port WWN to which the N_Port connects. Permanent Port Name Displays the physical N_Port or NL_Port WWN. Port Index Displays the index number of the physical N_Port to which the device connects. Share Area Displays "Yes" if the port shares an area; otherwise displays "No". Device Shared in Other AD Displays "Yes" if the device is shared in another Admin Domain; otherwise displays "No." Redirect Displays "Yes" if the device is involved in frame redirection; otherwise displays "No". The device involved in frame redirection is specified as either "virtual" , "host", or "target". Fabric OS Command Reference 565 53-1002746-01