Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 1017

supportSave 2 -c -k -u user_name -p password -h host_ip -d remote_dir -R -l protocol -U -t timeout_multiplier Uses the FTP, SCP, or SFTP parameters saved by the supportFtp command. This operand is optional; if omitted, specify the FTP, SCP, or SFTP parameters through command line options or interactively. To display the current supportFTP parameters, run supportFtp (on a dual-CP system, run supportFtp on the active CP). The -c option is mutually exclusive with -u, -p, -h, and -d. Specifies that the supportFtp auto file transfer configuration transfer only core and FFDC files in noninteractive mode. Specifies the user name for the FTP, SCP, or SFTP server. This operand is optional; if omitted, anonymous FTP is used. Specifies the password for the FTP, SCP, or SFTP server. This operand is optional with FTP; if omitted, anonymous FTP is used. Specifies the IPv4 or IPv6 address for the remote server. Specifies the remote directory to which the file is to be transferred. By default, the remote directory is created in the /support directory of the USB device. Removes all core files on the CP and BP. This option cannot be used with any other options. Specifies the transfer protocol. Valid values are file transfer protocol (FTP), secure copy (SCP), or secure FTP (SFTP). If you plan to use SCP to transfer files, it is important to test the supportSave command prior to its use with various SCP-mode services. Because the supportSave command makes several access requests to copy files, it is important that the SCP-mode service be configured so that passwords are not required for each attempted transfer by the supportSave command. Failure to configure the service correctly may result in significant delays in obtaining transferred output from the supportSave command. When using secure copy (SCP), supportSave may create a directory specified by the -d option if it does not already exist and the parent directory has the appropriate permissions. Use of FTP requires the directory to exist on the remote server. Saves support data to an attached USB device. When using this option, a target directory must be specified with the -d option. Extends predefined SupportSave timeout values by the value of the timeout multiplier. Use this option to repeat the supportSave operation when supportSave completion indicates that one or more modules timed out during the process. For example, -t 2 doubles the timeout values for each of the SupportSave modules. Valid multiplier values are 2 to 5. The default is 1. Fabric OS Command Reference 989 53-1002746-01