Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 921

rtLogTrace 2 rtLogTrace Manages real-time trace logging. SYNOPSIS rtlogtrace --enable rtlogtrace --disable rtlogtrace --show rtlogtrace --help DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to enable or disable real-time trace logging and to indicate whether the feature is enabled or disabled. The RTLog facility captures the most recent hardware events and low-level software interrupts on Brocade DCX platforms in real time. When enabled, the RTLog traces are collected as part of the supportSave utility. The RTLog generates no console output. The RTLog is enabled by default and persistent across reboots. The rtLogTrace configuration is lost after a power cycle. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: --enable Enables the RTLog on the active Control Processor (CP). The RTLog becomes effective on the standby CP after a failover or a reboot of the active CP. --disable Disables the RTLog. --show Displays the current status of the RTLog as enabled or disabled. --help Displays the command usage. To enable the RTLog: Switch:admin> rtlogtrace --enable To disable the RTLog: Switch:admin> rtlogtrace --disable To display the RTLog status: Switch:admin> rtlogtrace --show None Fabric OS Command Reference 893 53-1002746-01