Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 93

authUtil 2 SEE ALSO To set the Device policy to passive mode: switch:admin> authutil --policy -dev passive Warning: Activating the authentication policy requires DH-CHAP secrets on both switch and device. Otherwise, the F-port will be disabled during next F-port bring-up. ARE YOU SURE (yes, y, no, n): [no] y Device authentication is set to PASSIVE To set the device authentication policy to "on" mode: switch:admin> authutil --policy -dev on Warning: Activating the authentication policy requires DH-CHAP secrets on both switch and device. Otherwise, the F-port will be disabled during next F-port bring-up. ARE YOU SURE (yes, y, no, n): [no] y Device authentication is set to ON 2008/03/24-23:13:06, [AUTH-1003], 112,, INFO, Stealth_3, Device authentication type has been successfully set to ON To start authentication on E/F_Ports 2, 3, and 4: switch:admin> authutil --authinit 2,3,4 Warning: Initiating the authentication requires either DH-CHAP secrets or PKI certificates depending on the protocol selected. Failed authentication may result in traffic disruption. Authentication will not be initiated on encrypted ports. ARE YOU SURE (yes, y, no, n): [no]y To disable md5 hash type for FIPS configuration: switch:admin> authutil --show AUTH TYPE HASH TYPE GROUP TYPE fcap,dhchap sha1,md5 1 Switch Authentication Policy: PASSIVE Device Authentication Policy: OFF switch:admin> authutil --set -h sha1 Hash is set to sha1. switch:admin> authutil --show AUTH TYPE HASH TYPE GROUP TYPE fcap,dhchap sha1 1 Switch Authentication Policy: PASSIVE Device Authentication Policy: OFF portShow, secAuthSecret Fabric OS Command Reference 65 53-1002746-01