Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 873

portStatsShow 2 portStatsShow Displays port hardware statistics. SYNOPSIS portstatsshow [slot/]port portstatsshow -i [index1[-index2][...] [-f]] portstatsshow -x [hex1[-hex2] [...]] portstatsshow -slot [slot1[-slot2][...] portstatsshow ge [slot/]ge port portstatsshow ip [slot/]ge port [ip_address] portstatsshow fcip [slot/]ge port [tunnel_number] portstatsshow -h DESCRIPTION Use this command to display port hardware statistics counters. Some counters are platform- or port-specific and display only on those platforms and ports. All statistics have a maximum 32-bit value of 4,294,967,295. You can display statistics of a single port to be cleared by its port number or by its port index number in decimal or hexadecimal format. Port ranges are supported with port numbers, index numbers(decimal or hexadecimal) or by specifying a slot or a slot range. Use switchShow for a listing of valid ports, slots, and port index numbers. Specifying multiple ports with the index (-i) or slot (-s) option is supported only if PortSwap is disabled. They are not supported on GbE ports and configured F_Port trunks. Use the -i option without a port index to display the portSwap status, or alternately use portSwapShow. The command output may include the following fields (Tx indicates frames transmitted by the port; Rx indicates frames received by the port). stat_wtx The number of 4-byte words transmitted. stat_wrx The number of 4-byte words received. stat_ftx The number of frames transmitted. stat_frx The number of frames received. stat_c2_frx The number of class 2 frames received. stat_c3_frx The number of class 3 frames received. stat_lc_rx The number of link control frames received. stat_mc_rx The number of multicast frames received. stat_mc_to The number of multicast timeouts. Fabric OS Command Reference 845 53-1002746-01