Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 774

2 portFencing portFencing Configures the Fabric Watch port fencing feature. SYNOPSIS portfencing --show portfencing --enable port_type_list | all -area area_list | -area all portfencing --disable port_type_list | all -area area_list | -area all portfencing --help DESCRIPTION NOTES OPERANDS Use this command to enable or disable the Fabric Watch port fencing feature for specified port types and Fabric Watch areas. Supported port types include E_Ports, optical F_Ports, copper F_Ports, physical ports, and Virtual E_Ports (VE_Ports). You can configure a specified port type or a list of port types to enable port fencing for one or more areas. Use the all option to indicate all port types or all areas. Use the --disable option to disable port fencing for the specified areas on all ports of the specified port types. Use the --show option to display the configuration. The display includes the configured port types, error types, and port fencing status (disabled or enabled). Port fencing is disabled by default. Port fencing monitors ports for erratic behavior and disables a port if specified error conditions are met. The portFencing command enables and configures the port fencing feature; it does not set the thresholds for port fencing. You must configure port thresholds with the portThConfig command before you can enable port fencing. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command requires a Fabric Watch license. This command has the following operands: --show Displays the port fencing status of all configured port types and area types. --enable Enables port fencing for one or more specified port types and areas. Specifying at least one port type and area is required. This command fails if thresholds are not set. Refer to portThConfig help for more information. --disable Disables port fencing for a specified area on all ports in a port type list. Upon successful execution Fabric Watch ceases monitoring the ports for errors in the disabled area. You must specify at least one port type and area when disabling port fencing. 746 Fabric OS Command Reference 53-1002746-01