Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 156

2 chassisShow chassisShow Displays all field replaceable units (FRUs). SYNOPSIS chassisshow DESCRIPTION Use this command to display the Field Replaceable Unit (FR) header content for each object in the chassis and chassis backplane version. This command displays the following information: 1. The chassis family, for example, DCX 8510. 2. The backplane version number, in hexadecimal: Chassis Backplane Revision: xx 3. The first line of each record contains the object ID. If the FRU is part of an assembly, a brief description is displayed in parentheses. a. Object type: CHASSIS, FAN, POWER SUPPLY, SW BLADE (switch), CP BLADE (control processor), WWN (world wide name), or UNKNOWN. b. Object number: Slot nn (for blades), Unit nn (for everything else). 4. FRU header version number: Header Version: x 5. Displays the maximum allowed power consumption for a given hardware component: positive for power supplies and negative for power consumers. The combined total maximum allowed power consumption for the entire chassis is shown in the output of the slotShow -p command. Power Consume Factor: -xxx 6. Displays the real-time power consumption for each FRU that supports real-time power measurement. Only 16Gb blades currently support real time measurement of power being consumed by these blades. When the capability is not supported for a FRU, the line is suppressed. Power Usage (Watts): 7. Factory part number (up to 14 characters): Factory Part Num: xx-xxxxxx-xx 8. Factory serial number (up to 12 characters): Factory Serial Num:xxxxxxxxxx 9. FRU manufacture date: Manufacture: Day: dd Month: mm Year: yyyy 10. Date of the last FRU header update: Update: Day: dd Month: mm Year: yyyy 11. Cumulative number of days the FRU has been powered on: Time Alive: dddd days 12. Time elapsed, in days, since the FRU was last powered on: Time Awake: dddd days 13. Externally supplied ID (up to 10 characters): ID: xxxxxxxxxx 14. Externally supplied part number (up to 20 characters): Part Num: xxxxxxxxxxxxxxxxxxxx 15. Externally supplied serial number (up to 20 characters): Serial Num: xxxxxxxxxxxxxxxxxxx 16. Externally supplied revision number (up to 4 characters): Revision Num: xxxx The output of this command depends on the platforms on which it is executed. On some platforms, for certain FRU types, a few items may not be available. In these cases, the lines are suppressed. Possibly affected lines are 1, 3 through 7, 9, and 11 through 14. In addition, for lines 11 through 14, if there is no data set, these lines are suppressed. 128 Fabric OS Command Reference 53-1002746-01