Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 966

2 serDesTuneMode EXAMPLES --reset --show --autoenable --autodisable --autoreset --autoshow --help Disables SerDes tuning mode and resets SerDes values to default on FC8-16 blades in slots 1, 2 and 7 and on peer ports in the CR4S-8 core blade. Indicates whether the SerDes tuning mode is enabled or disabled. Enables SerDes tuning optimization on all backend ports. Disables further tuning optimization but retains all current tuning values identified by the algorithm. Disables further tuning optimization and resets all tuning values back to their default values. If SerDes tune mode or was set, the configuration is restored. Displays whether SerDes tuning optimization is enabled or disabled. Displays the command usage. To enable SerDes tuning mode on a DCX-4S chassis with two FC8-16 blades and to display the configuration: switch:admin> serdestunemode --set serdestunemode is turned on New serdes values set on slot = 1 New serdes values set on slot = 2 New serdes values set on slot = 7 switch:admin> serdestunemode --show serdestunemode is enabled To disable SerDes tuning mode and reset the SerDes values to defaults and to display the configuration: switch:admin> serdestunemode --reset serdestunemode is turned off New serdes values reset on slot = 1 New serdes values reset on slot = 2 New serdes values reset on slot = 7 switch:admin> serdestunemode --show serdestunemode is disabled To enable SerDes tuning optimization on all backend ports and to display the configuration: switch:admin> serdestunemode --autoset Autotunemode is turned on switch:admin> serdestunemode --show Autotunemode is turned on To disable SerDes tuning optimization on all backend ports and retain all current tuning values: switch:admin> serdestunemode --autodisable Autotunemode is turned off switch:admin> serdestunemode --show Autotunemode is turned off 938 Fabric OS Command Reference 53-1002746-01