Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 455

fwSetToDefault 2 fwSetToDefault Returns Fabric Watch thresholds and alarm levels to default values. SYNOPSIS fwsettodefault DESCRIPTION NOTES OPERANDS EXAMPLES Use this command to return Fabric Watch thresholds and alarm levels to defaults for all classes and areas in Fabric Watch. Fabric Watch uses two types of settings: factory default settings and user-defined custom settings. • Factory default settings are automatically enabled. These settings vary depending on hardware platform and cannot be modified. • For some settings, you can create custom threshold configurations to suit your unique environment. The fwSetToDefault command reapplies the Fabric Watch default configuration for all classes and areas. Use the advanced configuration option provided with the portThConfig, thConfig, and sysMonitor commands to view and modify custom and default values for specified classes and areas in Fabric Watch. For specific configuration procedures, refer to the Fabric Watch Administrator's Guide. This command requires a Fabric Watch license. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. None To return alarm levels to default values: switch:admin> fwsettodefault Committing configuration...done. To view the current Fabric Watch configuration for the environment class: switch:admin> sysmonitor --show env Class: ENV Area : TEMP ThLevel : Def ActLevel: Def High : Custom: TimeBase: None Value : 90 Trigger : Above Action: Raslog,SNMP Trigger : Below Action: None Default: TimeBase: None Value : 65 Trigger : Above Action: Raslog,SNMP Trigger : Below Action: Raslog,SNMP Low: Custom: TimeBase: None Value :32 Trigger : Above Action: None Trigger : Below Action: Raslog,SNMP Default: TimeBase: None Fabric OS Command Reference 427 53-1002746-01