Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 775

portFencing 2 EXAMPLES The following operands are required with the --enable and --disable options. port_type_list | all Specifies one or more port types for which to enable or disable port fencing. When specifying multiple port types, the list members must be separated by a comma. Alternately, use the all option to specify all of the following port types: e-port Enables or disables port fencing for all E_Ports. fop-port Enables or disables port fencing for all optical F_Ports. cu-port Enables or disables port fencing for all copper F_Ports. This operand is supported only on embedded platforms and only on copper ports. port Enables or disables port fencing for all physical ports. -area area | -area all Specifies one or more Fabric Watch areas to be monitored by the port fencing feature. Areas are not case sensitive. Alternately, use the all option to specify all of the following areas: CRC Cyclic redundancy check error. ITW Invalid word transmission PE Protocol error ST State Change LR Link reset C3TX_TO Class 3 frame discard due to timeout. --help Displays the command usage. To enable port fencing for the CRC area on all E_Ports: switch:admin> portFencing --enable e-port -area crc To enable port fencing for all areas on all E_Ports: switch:admin> portFencing --enable e-port -area all To enable port fencing for the CRC, ITW, and PE areas on all E_Ports: switch:admin> portFencing --enable e-port -area CRC,ITW,PE To enable port fencing for the ST area on all E_Ports and optical F_Ports: switch:admin> portFencing --enable e-port,fopport -area ST To enable port fencing for the ST area on all port types: switch:admin> portFencing --enable all -area ST Fabric OS Command Reference 747 53-1002746-01