Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 644
Deletes existing Top Talker monitors on the specified F_Ports or E_Ports. You can
View all Dell Brocade 6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 644 highlights
2 perfTTmon wwn | pid Specifies the output display as either WWN or PID format. This operand is optional. If omitted, the command displays in WWN format. --delete Deletes existing Top Talker monitors on the specified F_Ports or E_Ports. You can specify a single monitor by its port number, or you can specify all monitors. The -sconfig option deletes all stale monitors. -all Deletes all Top Talker monitors from online ports. -sconfig On a Condor 3-based platforms, the -sconfig option deletes all stale Top Talker monitor entries from the configuration file. A Top Talker monitor is considered stale when it can no longer monitor due to a configuration change, but it still exists in the persistent configuration. For example, a Top Talker becomes stale when a port configured for Top Talker goes offline or when a port blade is removed from the chassis On Condor 2-based platforms, the -sconfig option deletes all Top Talker monitors, as well as the configuration keys of all Top Talker monitors in the configuration file. This option deletes all configured monitors, regardless of the port state (online, etc). When a stale Top Talker entry is still present in the configuration file, you cannot enable FC routing services on Condor 2 platform, because Top Talkers cannot coexist with FC Routing services. FC Routing services and Top Talker monitors may coexist in a Condor 3 environment. Fabric Mode Top Talker commands: --add fabricmode Installs the Top Talker monitor on all switches in the fabric. When a new switch joins the fabric, this command must be run again on the switch. The TT configuration information is not propagated automatically to the new switch. In a mixed chassis configuration containing both 8Gb and 16Gb port blades, fabric mode is blocked when FCR is enabled. Port-level Top Talkers will be allowed on 16Gb blades but not on 8Gb blades when FCR is enabled. When you insert an 8Gb port blade into a chassis with fabric mode and FCR enabled, the blade is faulted. Use the fosConfig command to disable FCR or disable the fabric mode Top Talker. --show Displays the Top Talking flows on the switch for a given domain ID. dom dom_id Specifies the domain ID for the flow display. number of top talking flows Specifies "n" Top Talking flows. Valid values are between 1 and 32. If a value greater than 32 is entered, Top Talker displays counters for only 32 flows and a warning message. This operand is optional; if omitted, the command displays the top 8 flows. wwn | pid Specifies display as either WWN or PID format. This operand is optional; if omitted, the command displays in WWN format. --delete fabricmode Deletes the Fabric Mode Top Talker. --help Displays the command usage. 616 Fabric OS Command Reference 53-1002746-01